Allow Teamviewer both inbound and outbound

Showing results for 
Search instead for 
Did you mean: 

Allow Teamviewer both inbound and outbound

L0 Member


In PAN-OS FW we have user based authentication enabled. Now i found teamviewer is not working. I have allowed PORT 5938, 80 & 443.




Cyber Elite
Cyber Elite


I would start in the logs to see if/where the traffic is getting blocked.



L1 Bithead



Just tested this in PAN OS 8

firstly add the destination (ip address of what they need to connect to) - objects, addresses


then create a new rule for teamviewer -
Add your required zone and add source address (ip address you just added above)
Select require destination zone
Under application select the teamviwer application (had to add all three for it to work)

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!