Allow Teamviewer both inbound and outbound

[Debadutta]

Hi

In PAN-OS FW we have user based authentication enabled. Now i found teamviewer is not working. I have allowed PORT 5938, 80 & 443.

Thanks..

[OtakarKlier]

Hello,

I would start in the logs to see if/where the traffic is getting blocked.

Regards,

[DavidBleek]

@Debadutta

Just tested this in PAN OS 8

firstly add the destination (ip address of what they need to connect to) - objects, addresses

then create a new rule for teamviewer -
Add your required zone and add source address (ip address you just added above)
Select require destination zone
Under application select the teamviwer application (had to add all three for it to work)