07-12-2014 05:08 PM
Hello,
I noticed that when adding the Application MS-Lync and its dependencies, ports TCP 5065 & 49152-65535 are needed. In the Applipedia, it states TCP/Dynamic, but in order for this to work, I have to add these ports manually to the rule before this traffic is allowed. Shouldn't this be automatic or is this due to the fact that the ports are not static? Also the current installed content version is 445-2292.
07-14-2014 02:39 PM
Lync does require multiple different applications to the different servers in the security policies. The document below is most about Citrix Netscaler load balancing. But you will find a break down of the needed applications and policies by zone starting in Section 7 on page 43 for the Palo Alto rules in Lync deploys.
http://media.paloaltonetworks.com/documents/panw-netscaler-lync.pdf
07-14-2014 11:04 AM
Hello Mbattle,
MS-Lync and application-default will work in 5.0.x.
If PAN-OS is earlier than 5.0.x than you will have to add all dependent applications.
I am still working on this, will get back to you soon.
Regards,
Hardik Shah
07-14-2014 02:39 PM
Lync does require multiple different applications to the different servers in the security policies. The document below is most about Citrix Netscaler load balancing. But you will find a break down of the needed applications and policies by zone starting in Section 7 on page 43 for the Palo Alto rules in Lync deploys.
http://media.paloaltonetworks.com/documents/panw-netscaler-lync.pdf
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
