App-ID,dependencies and ports

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

App-ID,dependencies and ports

Not applicable

Hello,

I noticed that when adding the Application MS-Lync and its dependencies, ports TCP 5065 & 49152-65535 are needed. In the Applipedia, it states TCP/Dynamic, but in order for this to work, I have to add these ports manually to the rule before this traffic is allowed. Shouldn't this be automatic or is this due to the fact that the ports are not static? Also the current installed content version is 445-2292.

1 accepted solution

Accepted Solutions

L7 Applicator

Lync does require multiple different applications to the different servers in the security policies.  The document below is most about Citrix Netscaler load balancing.  But you will find a break down of the needed applications and policies by zone starting in Section 7 on page 43 for the Palo Alto rules in Lync deploys.

http://media.paloaltonetworks.com/documents/panw-netscaler-lync.pdf

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

View solution in original post

2 REPLIES 2

L6 Presenter

Hello Mbattle,

MS-Lync and application-default will work in 5.0.x.

If PAN-OS is earlier than 5.0.x than you will have to add all dependent applications.

I am still working on this, will get back to you soon.

Regards,

Hardik Shah

L7 Applicator

Lync does require multiple different applications to the different servers in the security policies.  The document below is most about Citrix Netscaler load balancing.  But you will find a break down of the needed applications and policies by zone starting in Section 7 on page 43 for the Palo Alto rules in Lync deploys.

http://media.paloaltonetworks.com/documents/panw-netscaler-lync.pdf

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 1 accepted solution
  • 2522 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!