APPLICATION INCOMPLETE

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

APPLICATION INCOMPLETE

L0 Member

Good day All

 

i had read all the possible solution to this issue, but still presenting the same symphtom, i have applied all solutions mentioned on all posts.

Capture.PNG

 

does anyone had or did something different?

 

thanks in advance.

kind regards.

 

5 REPLIES 5

L4 Transporter
Hello The screenshot shows two packets sent, but no packet received. This is a tcp connection, hence a three-way-handshake (which includes one received packet) is mandatory for connection setup. Your data doesn't show any NAT entry. Do you have the NAT rule configured?

Good day

 

No, i don't have a NAT, because we use PA as webfilter, the main link is connected to another firewall and from there we connect to the PA.

the 'front' firewall is mainly to block external sites/attacks.

 

thanks.

this looks like routing issue , palo alto identify application once it completes TCP 3 way handshake following data sent by server have any application data to perform pattern matching using signatures or for following destination cached entry is already stored in using APP ID cache.

You can try to filter using only destination IP and can see if application is identified earlier.

 

Run packet capture on firewall between source and destination to look for more detail.

SD-WAN | Cloud Networking | PCNSE | ICSI CNSS | MCNA | | CCNP | CCSA | SPSP | SPSX | F5-101 |

Yes, PCAP at this point is the way to go. Most likely:

 

* SYN/ACK packet is never received by Palo or

* SYN/ACK packet is received by Palo but it does not know how to route that packet back to the destination 

Do the packets hit the upstream firewall?

 

As mentioned it's either a routing or filtering issue elsewhere, the traffic is not returning.

 

Rob

 

  • 6336 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!