Bandwidth limitation per policy

[DerarAbubaker]

Hello All,

I have filled the local database with users because we do not have an Active Directory, i create a captive portal to enforce the users to do authentication. in the polices i have grouped the users depends on what they should go through network. 

I need to know if there is any way to limit the bandwidth for wan connections depends on the polices so i can limit the user bandwidth depends on the polices they are located in.

Is it ok to use the local DB for 50 users or may i face problems in future the FW is PA220.

[SutareMayur]

@DerarAbubakerYes, you can define specific Qos class to the specific source and destination under Qos Rules.

Also there are no limits for either users or groups in PAN local database. However, take system resource capacity into consideration.

Hope it helps you!

Mayur

[DerarAbubaker]

Could i say that users in this policy not exceed 3mbps for each one of them or it will gives me a limit for all of them at once?

[SutareMayur]

@DerarAbubakerTraffic will not exceed 3mbps if overall bandwidth defined as 3mbps for all users.

Mayur

[DerarAbubaker]

could i limit the bandwidth per user on any way on paloalto as we do it on the other vendors?

[SutareMayur]

@DerarAbubakerYes, it is also possible. You can define single or multiple users under Qos Rule and limit bandwidth as per your requirement.

 Please refer - https://docs.paloaltonetworks.com/pan-os/7-1/pan-os-admin/quality-of-service/qos-use-cases/use-case-...

Hope it helps you!

Mayur