block IP's in same zone

Showing results for 
Show  only  | Search instead for 
Did you mean: 

block IP's in same zone

L4 Transporter

Is it possible or practical to block traffic between two server in the same firewall zone by designating the source IP from the server you want to block access to the server to the destination server indicated by IP


L4 Transporter

If the traffic is passingg through the firewall while staying in the same zone, you could create an intrazone policy to block the traffic. Are the servers on different subnets and in the same zone?



Different subnet same zones, that is why I thought I could name the source IP range that I didn't not want to have access to the specific IP's of the server I don't want them to have access to or from

As long as the traffic between these hosts passes through the firewall, then you should be able to create an intrazone rule to deny whatever you need.

@rmfalconer @reaper @BPry

How do you have to configure an intrazone rule? 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!