block keywords

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

block keywords

L2 Linker

Hello,

I need a advice. We need to block any keywords for our users. Could you edvice how to do it?

Thanks

9 REPLIES 9

Cyber Elite
Cyber Elite

Hi

If you mean to block keywords in for example documents and emails you could set up data filtering which will allow you to block sessions that contain certain keywords

here's a document that can help you on your way:

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

hello I mean block keywords for web browsing

I tried to create application whith definition own signature with keyword. Problem is that some keyword are shorter than min. lenght pattern field (7). How can I solve it?

Thanks

A workaround for the minimum pattern length (which I feel is bad - should be taken care of by the PANOS itself to extend any short patterns into whatever the hardware demands as minimum length) could be to add some wildcards before and after.

Something like:

.*TEXT.* <- 8 bytes in length

hmm, I tried to type .*xxxxxx.* into the field pattern but again - Operation failed

-> signature -> test -> and-condition -> And Condition 1 -> or-condition -> Or Condition 5 -> operator -> pattern-match -> pattern '.*xxxxxx.*' is invalid. pattern must be at least 7 byte

L6 Presenter

this document will help I think.

Best Regards.

Where's the document?? I have the same issue..

@oscaringosv If you try to trick it into allow fewer charactors PA will issue out a warning about it not being in a proper format and therefor it's invalid. If your regex gets shorter than 7 bytes then you get a ton of false hits and you start blocking/acting on stuff when you don't mean to.

Thanks for your reply @BPry, and do you think this is possible via Custom Category?

 https://live.paloaltonetworks.com/t5/General-Topics/URL-wildcard-Pattern/m-p/136217#U136217

  • 11337 Views
  • 9 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!