Can't connect firewall to network

Reply
Highlighted
L0 Member

Can't connect firewall to network

I'm trying to setup a PA-220 for the first time. I'm able to access the fw via the web interface when I directly connect my laptop to the mgmt port. 

 

I'm stuck on Step 11 (https://docs.paloaltonetworks.com/pan-os/9-0/pan-os-admin/getting-started/integrate-the-firewall-int...).

 

I am not able to connect the fw to the network (step 11 in the link above). I ran a ethernet cable from the mgt port to a port on my Ubiquiti switch as it says and verified the port on the switch is set to auto negotiate. When I try to connect via ssh it just times out.

Highlighted
L4 Transporter

Hi @c_n0te ,

 

Hope you have followed previous steps and configured new IP address and the commit were successfull.

If you have permitted IPs configured, make sure your PC IP is permitted and service (https, ssh etc..) are allowed

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!