Cannot discover OSPF neighbor on PA

cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot discover OSPF neighbor on PA

L0 Member

Hi,

 

I faced a foundamental issue that my PA-VM cannot discover OSPF neighbor on Cisco vRouter. Cisco cannot discover PA either.

I use e1/2 on PA as the port to connect cisco vRouter, which is 192.168.150.1/24, and cisco router address is 192.168.150.2/24, area is 0.0.0.0 on PA and area 0 on cisco.

The cisco router can ping PA e1/2 successfully.

My configuration is really basic and simple, just configured a virtural router hung up with e1/2, and enable OSPF, area is 0.0.0.0, advertise 192.168.150.0/24. Nothing more, others are used default setting or not set.

My OSPF configuration on cisco router is okay, because I can establish adjacency between two cisco routers.

I browsed all the related configuration topic, cannot find where I should configure more. I know this is a basic and stupid issue but it stuck me for a long time. Please help.

 

Charlie B

2 REPLIES 2

L3 Networker

Hi there,

In your security policy is there a explicit deny above the built-in intra-zone policy?

 

Have you tried creating an explicit security policy for app type ospf? At this stage it can be pretty permissive and just specify source and destination zones, worrying about neighbour IP addresses can come later...

 

cheers,

Seb.

Cyber Elite
Cyber Elite

Hello,

Also make sure that you cisco routers are on the same zone. 0.0.0.0 in Palo Alto is not 0 in Cisco, they should be identical.

Regards,

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!