capture packets to the management interface?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

capture packets to the management interface?

L2 Linker

Is there a cli command to capture packets to/from the management interface?

1 accepted solution

Accepted Solutions

L6 Presenter

There is not a way to capture management interface traffic in the 3.1.X and older software releases.

You can use the service route feature to route some of the management traffic to an interface on the dataplane where you will be able to perform packet captures on that traffic.

View solution in original post

2 REPLIES 2

L6 Presenter

There is not a way to capture management interface traffic in the 3.1.X and older software releases.

You can use the service route feature to route some of the management traffic to an interface on the dataplane where you will be able to perform packet captures on that traffic.

L4 Transporter

As stated earlier there is no way to capture data directly from the management port, if you require this function you could burn an Ethernet port and force all traffic bound for the management port through the  firewall and then do a PCAP with a filter set for the management port.

~Phil

  • 1 accepted solution
  • 2287 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!