Change panorama mode from "management-only" to panorama-mode

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

Change panorama mode from "management-only" to panorama-mode

L4 Transporter

Hi, 

 

We have a panorama (version 10.1.6) in management-only mode. This panorama is maging 6 FWs. We would like to change the mode to panorama in order to get the logs. So what implications should keep in mind? i think it should be necessary to increase add a new disk with high space in Vmware? Its that correct? what is the recommendation about diskpace for a panorama (typical installation)?

SIZE.JPG

 

7 REPLIES 7

Cyber Elite
Cyber Elite

@BigPalo,

You'll need at least a 2TB disk to a maximum of 24TBs of space. I can't really comment on recommending sizing as this is going to heavily depend on what you log and what your retention goals actually are. 

 

https://docs.paloaltonetworks.com/panorama/10-1/panorama-admin/manage-log-collection/log-collection-...

OK, i know its everything depends on loggin configuration but i mean the minimum. We will take 2-5TB.

On the another hand, in order to change from management-only to panorama mode. Its enough to add a new disk and add the command???

request system system-mode panorama

following this procedure:

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PPTzCAO

@BigPalo 

That document has all the instructions on how to do it step by step.

After adding all the necessary hardware you need to run command 

 

request system system-mode panorama




Regards
Mahesh
MP

Help the community: Like helpful comments and mark solutions.

So the next step should be:

 

1) Stop VM and add size or disk to the VMware resources. What kind of disk should be?. Its enough increasing the space for the current disk?

 

2) Turn on the VM and add the command to move to panorama-mode.

 

My doubts are:

-We can do the procedure with this existing VM or we should create a new one with higher disk.

-What about the panorama config and policies. Should be lost touching the disk?

 

thanks

any idea?

Cyber Elite
Cyber Elite

dont increase the size of the existing disk, add another one thats' minimum 2TB, SCSI thick provisioned lazy zeroed

after having booted, run the command and then reboot again

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

@BigPalo Your existing config will not be lost.

Make sure you have the config backup.

MP

Help the community: Like helpful comments and mark solutions.
  • 3066 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!