- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
12-13-2022 11:06 AM
What are the steps to move the global protect VPN portal and gateway from one interface to another on the Palo Alto firewall? We are wanting to move it to it's own interface.
12-13-2022 11:19 AM - edited 12-13-2022 11:20 AM
Assuming current interface is UNTRUST and you move it to DMZ interface you need security policy NAT policy as to permit incoming traffic on ports tcp/443 and udp/4501.
If you add tcp/80 then users don't need to put https:// in front of portal but http to https redirect will be sent from Palo to broser.
Application based security policy would need ipsec, panos-global-protect, ssl and web-browsing
04-11-2023 03:08 AM
Create a new interface and assign the ip address and use the interface for the GP GATEWAY & PORTAL and configure the necessary zone and other interface settings as well.
Now go to the GP portal and gateway> update the settings of the GP Portal and Gateway setting with the new interface. after updating the settings and configurations. Test the Connection of GP VPN is working properly or not.
once you are good to go delete the old interface.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!