- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-02-2024 06:39 AM
Hi All,
Has anyone tried this yet and does it work?
to use a Cisco SFP-10GB-LR module in a PA-3430.
yes I am aware of the support aspect around not being true palo branded, but time is of the essence and I need a quick solution as the Palo branded SFP is 5-6weeks leadtime and cannot wait that long.the Cisco SFP i have some spares but not close to the FW to test myself.
thanks in adv
10-02-2024 10:20 AM - edited 10-02-2024 10:21 AM
Hello @PA_nts
I have not personally tested the mentioned Cisco SFP module, but you may find the following article helpful. It discusses non-PANW SFPs and can be found at the following link: https://live.paloaltonetworks.com/t5/operations-documentation/hw-accessory-cross-reference-810-00007....
Regards
10-03-2024 10:25 AM
I've done plenty of deployments that use Cisco's SFP-10G-LR without issue, but I can't say that I've done so on this specific platform for certain. Generally speaking I don't stress too much about using supported PAN optics; I've never once ran into an issue with PAN asking for a supported receiver unless it truly looked like the transceiver being used might be causing the issue.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!