CLI debug pcap verbosity levels

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

CLI debug pcap verbosity levels

L1 Bithead

I've been using the cli debug pcap captures for a number of issues recently but was frustrated in the last one by a lack of detail. In this case I was capturing OSPF (debug routing pcap ospf on). When I viewed the capture it looks more like a summary of the hello messages without the contents.

 

Is there a generic was to turn up the level of information in these pcaps? I'm not asking for tips specific to OSPF troubleshooting, I'm looking for a magic wand that can control the level of verbosity in any of the non-dataplane debug pcaps.

1 REPLY 1

L7 Applicator

Are you using these instructions for the CLI captures?

 

https://live.paloaltonetworks.com/t5/Tech-Note-Articles/Packet-Based-Troubleshooting-Configuring-Pac...

 

I think these are basically filters on tcpdump directly.  I had not noticed any truncations of information using this method.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 2244 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!