cli error messages during boot

Reply
L1 Bithead

cli error messages during boot

Dear community,

 

after factory resetting one of our pa220s i am seeing multiple error messages during boot up

 

Starting ntpd: [  OK  ]

FATAL: Module nfsd not found.
FATAL: Error running install command for nfsd
Starting NFS services:  [  OK  ]

Starting NFS mountd: [  OK  ]

Starting NFS daemon: [  OK  ]

Starting RPC idmapd: [FAILED]

Starting PAN Software: cp: cannot stat '/opt/pancfg/mgmt/wf_backup/wildfire-images/*': No such file or directory
cp: cannot stat '/opt/pancfg/mgmt/wf_backup/curwildfire/*': No such file or directory
cpld: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
cgroup: cgroups_setup (2895) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  OK  ]

 

The device comes up with a green status LED, but since it is to be deployed in a far away remote location i am wondering if it is best to open a support call?

 

Thank you in advance for your help.

Tags (2)
Highlighted
L7 Applicator

try loading it with appropriate licences and downloading and installing latest content packages, this may clear up the errors

Tom Piens - PANgurus.com
Find my book at amazon.com/dp/1789956374
Highlighted
L1 Bithead

@reaperThank you for your response. The device is now fully licensed and updated to PAN-OS 9.0.2 with the latest content updates.

 

But unfortunately some errors remain

 

Starting ntpd: [  OK  ]

FATAL: Module nfsd not found.
FATAL: Error running install command for nfsd
Starting NFS services:  [  OK  ]

Starting NFS mountd: [  OK  ]

Starting NFS daemon: [  OK  ]

Starting RPC idmapd: [FAILED]

Starting PAN Software: cpld: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
cgroup: cgroups_setup (2830) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[  OK  ]  

 

Highlighted
Cyber Elite

did you open tach case for this?

 

or lets see if anyone replies to this curious to know about this?

MP
Highlighted
L0 Member

I have the same errors just after upgrading PA-820 (out of the box- default config) from 8.1.6 to 9.0.4.

 

Highlighted
L0 Member

Did anyone get a resolution to this?  I’m seeing the same thing. Only noticed today after my pa220 crashed. And I connect up the serial port to observe the reboot. 

Highlighted
L7 Applicator

May want to try factory reset to fix this issue

Tom Piens - PANgurus.com
Find my book at amazon.com/dp/1789956374
Highlighted
L0 Member

I was able to restore the system formatting all partition, did disk check for all partition and reinstall PAN-OS. I think that CLI error is an OS bug.

Highlighted
Cyber Elite

Seems still error is there?

MP
Highlighted
L0 Member

Hi,

 

I have seen this message during reboot of almost all models and Pan-OS and thinking this is normal behavior. Once firewall boots up observed no issue.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!