Client certificate and LDAP authenticate on Global Protect

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Client certificate and LDAP authenticate on Global Protect

L4 Transporter

Hello

I have a question.

My customer want to use Global Protect.

He want 2-factor authentication.

User authentication client certificate on 1-factor.

And then user authentication ID/PW to Active Directory by LDAP on 2-factor.

I have searched and seen below.

"We're not using another form of authentication" on page 7 in this DOC.

Can Global Protect use both client certificate profile and authentication profile?????

1 accepted solution

Accepted Solutions

L3 Networker

Yes works great. Just need to do a couple of things.

1) You need a CA to issue certs. The Palo firewall can act as a CA if you don't have one

2) Then you need to configure a certificate authenication profile

gp cert auth profile.png

3) Next configure both the portal and the gateway to use the certificate authentication profile

gp config.png

4) You will also need to install the client certificate on the client PC

This will allow you to have 2 factor authentication.

View solution in original post

4 REPLIES 4

L3 Networker

Yes works great. Just need to do a couple of things.

1) You need a CA to issue certs. The Palo firewall can act as a CA if you don't have one

2) Then you need to configure a certificate authenication profile

gp cert auth profile.png

3) Next configure both the portal and the gateway to use the certificate authentication profile

gp config.png

4) You will also need to install the client certificate on the client PC

This will allow you to have 2 factor authentication.

Wow, Thank you very much.

I will retry it on your assistance.

do you use Machine certificate or client certificates?

our domain computers all have machine certificate from our internal CA, and i wish to verify that only they can connec with global protect

I use client certificates. This certificates are issued by internal CA.

  • 1 accepted solution
  • 5556 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!