06-07-2024 04:57 AM - edited 06-07-2024 06:43 AM
Hi to all, I have a question regarding the cluster config tab (i have attached a picture). There we are adding the peers only, or we have to add also the same device I am a configuring. For example I have 3 devices, That table of devices should be three (3) or only the peers which are two(2) at every cluster member.
06-10-2024 03:48 PM
Hi @kvagenas ,
You will need to specify all members within a cluster which also includes the local member you are on. For more info, please take a look at HA Clustering Overview and Configure HA Clustering.
Hope this helps!
06-10-2024 03:48 PM
Hi @kvagenas ,
You will need to specify all members within a cluster which also includes the local member you are on. For more info, please take a look at HA Clustering Overview and Configure HA Clustering.
Hope this helps!
06-11-2024 06:09 AM
Thank you for the response and the guides you offered.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
