- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-29-2021 11:12 AM
PAN provides anti-spyware signatures for Cobalt Strike Payload Traffic Detection and Cobalt Strike Beacon Command and Control Traffic Detection that are automatically downloaded to our PAN firewall. I also use the four External Dynamic Lists that PAN provides to block known bad IPs. NJCCIC and MS-ISAC sometimes send me lists of known bad IPs that recently included Cobalt Strike IP addresses. Can anyone recommend how I can efficiently integrate this into our PAN firewalls?
10-29-2021 03:19 PM
Kind of confused on what you are asking? If you just want an easy way to ingest NJCCIC and MS-ISAC indicators I would recommend setting up MineMeld and using it's API to feed in the indicators to a dedicated output node.
11-01-2021 08:21 AM
MindMeld sounds like what I am looking for. Do I need to purchase AutoFocus to use MindMeld?
11-01-2021 09:08 AM
Hi,
Minemeld is open source so you don't need to purchase Autofocus to use it. There are a range of in-built feeds , some of which require a licence others that do not.
A little off topic but Minemeld is also very good for dynamically managing O365 IP Addresses.
11-01-2021 09:48 AM
As @MichaelWrigh mentioned MineMeld itself is free. It was included with AutoFocus for a bit, but that's actually in the process of being end of lifed in favor of Cortex XSOAR's threat management solution.
The MineMeld docker image is still available with installation instructions available HERE or through MineMeld's primary Github repo from source. Your use case you may also want to look at minemeld-sync.py
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!