Commit Error (sslvpn)

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Commit Error (sslvpn)

L1 Bithead

Hi,

I am recieving the following error when issuing a commit,

Management server failed to send phase 1 abort to client sslvpn

Management server failed to send phase 1 to client useridd

Commit failed

The only change in configuration is adding new local users which are used for global protect.

I am running 5.0.1

Regards

4 REPLIES 4

L5 Sessionator

Hi,

Can you run "show management-clients" next time you do a commit and see if the

"sslvpn  10    P2-ok      100"

is stuck at 98 or 99 instead of 100. If that is the case, restart management server "debug software restart management-server " and try to do a commit again and see that makes any difference. Thanks.

L5 Sessionator

Hi,

Can you see if you are getting any cores on the device.

You can do show system files from CLI and see if the system cores when commit fails.

Also what happens if you revert the changes you made. Does it allow you to commit then.

If it does then it is quite possible that the configuration might be incorrrect.

Thanks

Numan

L1 Bithead

Thank you for the feedback,

The commit for the same configuration is happening sometimes and sometimes I receive the error

Regarding the "show management-clients" it is 0

As for cores I can see the following:

/opt/dpfs/var/cores/:

total 4.0K

drwxrwxrwx 2 root root 4.0K Dec  6 17:53 crashinfo

t/dpfs/var/cores/crashinfo:

total 0

/var/cores/:

total 27M

drwxrwxrwx 2 root root 4.0K Jan 31 10:04 crashinfo

-rw-r--r-- 1 root root  27M Jan 31 10:17 websrvr_5.0.1_2.tar.gz

/var/cores/crashinfo:

total 36K

-rw-rw-rw- 1 root root 9.2K Dec 10 09:48 websrvr_5.0.1_0.info

-rw-rw-rw- 1 root root  11K Jan 14 06:19 websrvr_5.0.1_1.info

-rw-rw-rw- 1 root root  10K Jan 31 10:04 websrvr_5.0.1_2.info

Try restarting management server and see if this fixes the issue with subsequent commits. Management-Server restart has zero impact on traffic. You should log-out and log in back after the management server restart.

command for the same.

debug software restart management-server

Thanks,

Sandeep T

  • 4319 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!