12-07-2015 02:17 PM
Hello PAN Community.
I would like to read your opinions/comments about the following situation: we currently have a HA Scenario deployed in production with 2 PA-3050 in active-pasive mode, both of them with PAN-0S 6.0.4. We plan to replace the scenario with PA-3020 appliances and both of them with PAN-OS 6.0.6 installed.
How should we proceed? Is there any consideration we must keep in mind to successfully migrate the whole configuration to these new hardwares?
Thanks and regards
12-07-2015 03:01 PM
Sync config on 3050s; bring up a HA pair of 3020s, install PAN-OS 6.0.4 on 3020s; import config from 3050 to 3020; sysn config; check config for errros (compare 3020 with 3025), if all OK, upgrade 3020 to 6.0.6.
12-07-2015 02:45 PM
Just take care of the multivsys related configuration if you have used multivsys configuration else everything should go smoothly. Export from 3050 and import to 3020
12-07-2015 03:01 PM
Sync config on 3050s; bring up a HA pair of 3020s, install PAN-OS 6.0.4 on 3020s; import config from 3050 to 3020; sysn config; check config for errros (compare 3020 with 3025), if all OK, upgrade 3020 to 6.0.6.
12-07-2015 04:04 PM
Another thing will be upgrade the 3050 first test the config if everything is working then you can do the migration.
12-09-2015 11:04 AM
So it will work if we export/import from 6.0.4 to 6.0.6?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
