09-05-2024 08:14 AM
hi,
I have 2 palo alto and I have them in different buildings and I want to set up an HA between them how can I do it without just pulling a direct cable I want it to go through the network infrastructure.
Kind regards
09-05-2024 09:19 AM - edited 09-05-2024 09:20 AM
@Yenn_Alfredo wrote:
hi,
I have 2 palo alto and I have them in different buildings and I want to set up an HA between them how can I do it without just pulling a direct cable I want it to go through the network infrastructure.
Kind regards
Easy. Somewhat...There are some prerequisites mainly you need some sort of wired connectivity between the 2 locations. Either the 2 locations need to be apart of the same L2 domain or you need dedicated wired connectivity that you can use to essentially connect the 2 devices together.
Over this L2 extension or dedicated connectivity connect HA1 ports together then for HA2 take one of your data ports set to HA and use this port in your HA config.
I followed this methodology to HA Pair 5060s/5220s across ~200 miles and had zero issues.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
