Configure NTP to pull from AD server on window server 2019

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Configure NTP to pull from AD server on window server 2019

L1 Bithead

Hi Everyone,

 

Can we configure NTP to pull the time from Window Server 2019 base AD server? I configured already and it seen to be able to reachable but unable to sync. There is no authentication configure. I tried the same on Cisco Switch and it able to sync the time from the same AD server, only Palo Alto FW can't.

 

I did the PING and Traceroute from FW management port to that AD server and it seen working fine. The connection to AD server for NTP through management port. There is no permitted IP configured. Which logs we have to refer in order to troubleshooting? dagger.log?

 

Thank you. 

2 REPLIES 2

Cyber Elite
Cyber Elite

I do not use FQDN names for my ntp servers. I use only the IPs and I do not see to have issues.

And yes.. tail follow -yes mp-log dagger.log could be a way as well.

Help the community: Like helpful comments and mark solutions

I never use FQDN for ntp server as well, i using IP address. 

  • 2311 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!