I am having some fundamental problems configuring OSPF. Here's the simple configuration:
PA interface IP: x.y.200.94/29
Cisco interface IP: x.y.200.85/29
From the PA CLI I can ping the remote Cisco router just fine:
admin@fs> ping source x.y.200.94 host x.y.200.89
PING x.y.200.89 (x.y.200.89) from x.y.200.94 : 56(84) bytes of data.
64 bytes from x.y.200.89: icmp_seq=1 ttl=255 time=9.92 ms
64 bytes from x.y.200.89: icmp_seq=2 ttl=255 time=1.50 ms
And yet from the Cisco router, there is no response. I do not believe I have any policies in place which block ICMP echo packets.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!