Configuring QoS settings multiple egress interfaces

[wfleitz]

We currently have our PA-5050 configured with two vWire ingress and two vWire egress interfaces (one trust and one untrust zone mapped to vWire-1 and one trust and one untrust zone mapped to vWire-2). In this configuration is it possible to configure QoS? I see that when configuring QoS on the interface you only have the option to select a single interface. Is there a way adding two interfaces to the QoS? Thanks.

[mikand]

Setup a QoS profile and assign it to whichever interface(s) you like.

However im not sure if QoS is suitable to use in vwire situations.

[sdurga]

This doc is about QoS in pan, it might be helpful for you. Configuring QoS on V-Wires should not be any different than configuring it on other type of interfaces.

https://live.paloaltonetworks.com/docs/DOC-3439

[wfleitz]

Thanks for your helpful responses. We'll go ahead and create the QoS profile and apply it to both egress interfaces and see how that works out.