Configuring QoS settings multiple egress interfaces

Showing results for 
Search instead for 
Did you mean: 

Configuring QoS settings multiple egress interfaces

L0 Member

We currently have our PA-5050 configured with two vWire ingress and two vWire egress interfaces (one trust and one untrust zone mapped to vWire-1 and one trust and one untrust zone mapped to vWire-2). In this configuration is it possible to configure QoS? I see that when configuring QoS on the interface you only have the option to select a single interface. Is there a way adding two interfaces to the QoS? Thanks.


L6 Presenter

Setup a QoS profile and assign it to whichever interface(s) you like.

However im not sure if QoS is suitable to use in vwire situations.

L6 Presenter

This doc is about QoS in pan, it might be helpful for you. Configuring QoS on V-Wires should not be any different than configuring it on other type of interfaces.

Thanks for your helpful responses. We'll go ahead and create the QoS profile and apply it to both egress interfaces and see how that works out.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!