connecting sfp.

Showing results for 
Show  only  | Search instead for 
Did you mean: 

connecting sfp.

L3 Networker


recently i connected two sfp on my 2020 but under interfaces cant see there status,, is there a command to enable them or checking the status,,, one last thing i connected the sfp while the system is online does it affect ?



L4 Transporter
Check to make sure the SFP is on the approved list.
You should be able to see status on the WebUI but you can also try looking through the CLI;
pa> show interface ethernet1/x
And yes you can connect the SFP while online.


Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!