Connection HTTPS / HTTP and SSH not working

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Connection HTTPS / HTTP and SSH not working

L1 Bithead

I can't connect via SSH HTTP or HTTPS to my PA-500 firewall .

I can ping it from my network and that's all .

Also , the strange thing it is that from panorama the device is reachable 

I have checked the traffic -> is allow

I have checked management interface -> is allowing my IP addresses + HTTPS SSH and HTTP are ticked .

 

What else could be the issue ?

5 REPLIES 5

Cyber Elite
Cyber Elite

@Nicu21 

 

Are you using Management Interface of PA to ssh it?

Is your IP address from which you are trying to ping is in allowed list?

 

Regards

 

 

MP

Help the community: Like helpful comments and mark solutions.

Cyber Elite
Cyber Elite

@Nicu21,

In addition to what @MP18 already mentioned, I would look and see if you don't have a service route configured to allow Panorama traffic and if that's actually using your management interface or not. 

Enabling access to the management interface is straightforward and should be working with what you have described if you have committed the configuration and are attempting to connect to the proper IP address. 

Are you using Management Interface of PA to ssh it? -> Yes

Is your IP address from which you are trying to ping is in allowed list? -> Yes , it is 

@Nicu21 

 

Please do PCAP on the MGMT interface while you test the ssh to PA

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CleECAS

 

This will show you if traffic is hitting the PA or not?

 

Regards

MP

Help the community: Like helpful comments and mark solutions.

L1 Bithead

I have removed all of the allowed IP from mgmt interface , and then it works .

Practically i dont have an explanation because my IP address was there .

 

Case is solved , maybe if you can help me with an explanation , why it works after 

  • 6319 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!