Cookie and User Password both expired

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Cookie and User Password both expired

L4 Transporter

A user while connected over VPN has his password expired and does not renew in time. So the local system will have the information that account is expired and would not let login. Also during the same time GP cookie expires and that means there is no pre-logon tunnel that enables password reset remotely by user himself.

 

Is giving local admin password temporarily or make him bring his laptop to campus where it can again connect to AD are the only options to fix it. Is there anything else that can be done.

1 accepted solution

Accepted Solutions

L3 Networker

Try adjusting the cookie lifetime on the Portal/Gateway to cover when the cookie was generated.

 

The endpoint doesn't know the cookie is expired, this is something that's checked server side since different Gateways could have different cookie lifetime settings.

 

I believe the local cookie should still be valid. You can try changing the lifetime to a month or whatever (hopefully) works, and then change it back to the usual setting once the password has been changed properly.

 

Regards,

- DM

Sr. Technical Support Engineer, Strata

View solution in original post

2 REPLIES 2

L3 Networker

Try adjusting the cookie lifetime on the Portal/Gateway to cover when the cookie was generated.

 

The endpoint doesn't know the cookie is expired, this is something that's checked server side since different Gateways could have different cookie lifetime settings.

 

I believe the local cookie should still be valid. You can try changing the lifetime to a month or whatever (hopefully) works, and then change it back to the usual setting once the password has been changed properly.

 

Regards,

- DM

Sr. Technical Support Engineer, Strata

L4 Transporter

Thank you @dmifsud that worked.

  • 1 accepted solution
  • 2313 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!