CryptoCard Card.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

CryptoCard Card.

L4 Transporter

When using the Cryptocard authentication server we have had issues where no radius packets are coming through the PA500 on version 4.0.1.  When the packet capture (tcpdump) was run no packets appeared on the interface.....

The only way to solve this problem was to upgrade to 4.0.4, the latest release.  Magically this worked. I require some sort of explanation as to why this information did not go through, is this a known issue? Why would upgrading simply fix the problem? Would this occur on 4, 3 and 2 revisions of PA.  fairly concerning.

2 REPLIES 2

L4 Transporter

Answer in the question.

L6 Presenter

There could be a variety of root causes for the issue that you describe, but without the device logs or a debugging session while you are experiencing the issue there is no way to be sure what was actually happening in this case.

If you run into an issue where the device is not working properly you should probably open a support case if you want to determine the root cause of the issue.

-Benjamin

  • 1759 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!