11-15-2023 12:04 AM
One of our passvie firewalls encountered the problem "Dataplane is down: path monitoring failed". The reason may be that we replaced the fan. At present, I found the following link to the official documentation of Palo Alto. Because we have no plans to upgrade for the time being, can anyone tell me in what state my device is restarted in the third point of the workaround? Is it in the powered on state or in the off state?
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000HCcXCAW
11-15-2023 02:58 AM
you can only run this command while the device is powered on
if either of the interfaces displayed in the output is down, the recommendation is to perform a reboot
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
