Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Default router in interface config

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Default router in interface config

L3 Networker

When an interface of PA is assigned an virtual router, even if the virtual router is just created without any other route configuration such as static route, ospf etc, the interface still can start to work(be able to ping its connected neighter device), right? so what is virtual router for in this situation? 

4 REPLIES 4

L7 Applicator

In that situation... you do not need a VR, your firewall will know how to get to the neighbor as it is locally attached.   if the network you are trying to connect to is not locally attached to the firewall then the VRouter/OSPF/Static routes etc will tell you how to get there...

L3 Networker

 

@Mick_Ball wrote:

In that situation... you do not need a VR, your firewall will know how to get to the neighbor as it is locally attached.  

 

No, the device connected to PA physically cannot ping the PA if no virtual router is created and associated with the interface connected to the device

 

 

 

 

L4 Transporter

Hi there,

The Virtual Router provides two important system objects, the RIB and FIB. Even with a single interface both of these tables would be populated with information which would instruct the system kernel how to forward packets. I'm no linux kernel expert but without these two tables I'd wager that any Layer 3 function would cease to operate.

 

cheers,

Seb.

yes of course... aplogees for misleading info...  it was more of a L3 connection in general and assumed by the original post that it was possible...

 

  • 1024 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!