Delete VSYS configuration

[Vaibhav]

I have a VSYS on my PA-5050 which is no more required and needs to be deleted.

What steps needs to be taken for this?

Is it unassigning all the interfaces in that , deleting all policies etc or do we have a proper step by step thing for this?

Thanks all in advance

Regards

Vaibhav

[HULK · Accepted solution]

Hello Vaibhav,

There is no specific step you need to follow for the same. Just need to delete the VSYS under Device >> Virtual System and you are correct, it will unassign all the interfaces in that , deleting all policies etc.

Thanks

[Vaibhav]

Hello Hulk,

Thanks for the reply.

I was thinking for the same, but would it allow me to delete the VSYS without un assigning the interface. It was the case with Juniper but i am not sure of Palo Alto.

Thanks

Vaibhav

[HULK]

Hello Vaibhav,

Once you will delete a VSYS from PAN firewall, It will un-assign the VSYS information from the interface-configuration automatically. As per my knowledge, In case of Juniper SRX firewall, you need to manually un-assign the same settings individually from interfaces.

Hope this helps.

Thanks

[Vaibhav]

Thanks Hulk.

I am going to try this thing now.