Device registration auth key is required for on-boarding firewall running PAN-OS 10.1 and above. All firewalls running PAN-OS 10.0 and lower do not re

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Device registration auth key is required for on-boarding firewall running PAN-OS 10.1 and above. All firewalls running PAN-OS 10.0 and lower do not re

L2 Linker

Device registration auth key is required for on-boarding firewall running PAN-OS 10.1 and above. All firewalls running PAN-OS 10.0 and lower do not require or support device registration auth key. You can use the button below to create OR copy the default auth key valid for 24 hours for any firewall you onboard OR go to Panorama->Device Registration Auth Key node to create OR copy auth keys with custom settings. 

 

What does it mean?
In the version 11.0 of pan-450, there is no prompt for this, and there is no panorama environment

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Hello @ZhouYu

 

to add a Firewall running PAN-OS 11 to Panorama, the Panorama has to run PAN-OS 11 as well. The setting to add authentication kay is under: Device > Setup > Management, then Panorama Settings. Here is the link for documentation: Doc.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hello @ZhouYu

 

to add a Firewall running PAN-OS 11 to Panorama, the Panorama has to run PAN-OS 11 as well. The setting to add authentication kay is under: Device > Setup > Management, then Panorama Settings. Here is the link for documentation: Doc.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.
  • 1 accepted solution
  • 2032 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!