DHCP Relay not returning address from MS AD DHCP Server

Showing results for 
Show  only  | Search instead for 
Did you mean: 

DHCP Relay not returning address from MS AD DHCP Server

L1 Bithead

We setup a DHCP relay to a MS 2008R2 DHCP server, server recieves the relay and passes a client address back to PA 2050 running 4.1.3, the address does not get passed through to client, logs show only thr DHCP request going out but nothing back, no blocks in logs, we know the address packet is being returned to the server side PALO NIC.

we even opened all protocols both ways, but still nothing going back and no blocks or system errors.

anyone have any ideas?


Kind regards




In our setup we run static routes, so that won't be an issue for us.

We are going to test again when we move to 4.6 soon, to see if that resolves



Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!