- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-24-2016 07:51 AM
Hi all, maybe someone can help me with this.
Just did a factory reset on a PA-200 via maintenance mode (via console) and now system reboots automatically in maintenance mode.
I followed instruction from here:
When I go in System Information i see the following:
Platform: none
Active Sysroot: sysroot0
U-boot Version: 5.0.6.0-14
When I reboot system before i get the maintenance mode page i see the following:
Remounting root filesystem in read-write mode: mount: can't find / in /etc/fstab or /etc/mtab
[FAILED]
Anyone can help me with this?
thanks
02-24-2016 08:03 AM
> You will need to do a hard disk check
> Follow the link :
> The output should confirm if your harddisk has gone bad
02-24-2016 08:11 AM
Thanks for input
I did just that and when i select Diagnostics and enter password MA1NT i see option Test Disk Performance. When I select this option the screen goes black (i see nothing) and after 30 seconds or so the screen goes back to the welcome to maintenance mode screen.
Is that normal?
02-24-2016 08:15 AM
Here's what is displayed when i reboot device (right before it goes automatically to maintenance mode):
Welcome to PanOS
Starting udev: [ OK ]
Setting clock (utc): Wed Feb 24 11:15:16 EST 2016 [ OK ]
Setting hostname PA-200: [ OK ]
Checking filesystems:
Running filesystem check on pancfg: [ OK ]
Running filesystem check on panrepo: [ OK ]
[ OK ]
Remounting root filesystem in read-write mode: mount: can't find / in /etc/fstab or /etc/mtab
[FAILED]
rm: cannot remove `/etc/mtab~': Read-only file system
rm: cannot remove `/etc/mtab~~': Read-only file system
mount: can't find / in /etc/fstab or /etc/mtab
INIT: Entering runlevel: 3s of `/
Entering non-interactive startup
/sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: Unknown error 6002
/etc/rc3.d/S10panhw: line 15: /etc/cfgdb/eeprom.xml: Read-only file system
rm: cannot remove `/var/run/confirm': Read-only file system
02-24-2016 08:23 AM
> Getting a black screen on HD test and then returning back to the welcome maint screen is not normal
> Please reach out to the Paloalto support, I think the device might have gone bad
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!