Looking to manage more than 100+ devices (around 300 device). is the M-100 able to meet this requirement?
below is my current planning setup:
M-100 (panorama mode) <--------------------------> 100+ PA box
or do i required another M-100 box as log collector in between?
M-100 (Panorama mode)<------------------------> M-100 (log Collector mode) <-----------------------> 100+ PA box
Appreciate any input..thanks
According to this Spec Sheet for the M-100 decive:
Panorama M-100 devices will support 1000 devices.
As far as when you will need an additional M-100 for a log collector inbetween the Firewall and Panorama, I am going to recommend that you contact your local SE (sales engineer) so they can best advise what you what will fit best in your environment.
Manage more than 100 is not a problem. The issue will be if you are collecting and using logs how much logging per second you are getting and at what point additional log collectors will be needed to avoid losing information.
The second issue is then how much disk space you need to save historical logs.
When you have many devices and so many logs you are worried about getting all of the logs, then that is why we have designed the M-100's to be a Panorama Manager and then the M-100's can be dedicated log collectors. You can have many M-100 Log collectors all reporting to Panorama. Panorama manages the M-100's and the Firewalls.
So the Firewalls send their logs to the M-100's and then when you need to run reports, etc, Panorama goes to the M-100 units to read the logs.
I hope this makes sense.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!