DSRI for VPN Tunnel

cancel
Showing results for 
Search instead for 
Did you mean: 

DSRI for VPN Tunnel

L3 Networker

I can't seem to find a clear answer to this, and there may not be one. I have a VPN tunnel between 2 sites, both on PA-820's. Would "disable server response inspection" on the VPN policy on both sides benefit from this? What are the potential downsides if I did do this?

____________________

Just another I.T. Guy

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

Hello there

 

You should probably NOT perform DSRI between the VPN. (do not checkbox the setting)

Either site could have dirty traffic/malware/etc, so it is best to not disable a security setting like that.

You want the FW to scan for all threat potential traffic. 

 

Help the community: Like helpful comments and mark solutions

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Hello there

 

You should probably NOT perform DSRI between the VPN. (do not checkbox the setting)

Either site could have dirty traffic/malware/etc, so it is best to not disable a security setting like that.

You want the FW to scan for all threat potential traffic. 

 

Help the community: Like helpful comments and mark solutions

Thanks Steve,

 

That's pretty much what my conclusion was also, just wanted some verification.

____________________

Just another I.T. Guy

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!