Dynamic Updates using an Interface with dynamic IP address

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Dynamic Updates using an Interface with dynamic IP address

Not applicable

Hi,

I would like to know how to configure the Palo Alto Updates in Service Route Configuration using an interface with dynamic ip address?

When I´m using dynamic ip the interface doesn´t appear in Device -> Setup -> Services -> Service Route Configuration.

Thank you and regards,

1 accepted solution

Accepted Solutions

L5 Sessionator

You can't choose I/F with dynamic IP address.

The following doc shows you the workaround.

Regards,

View solution in original post

1 REPLY 1

L5 Sessionator

You can't choose I/F with dynamic IP address.

The following doc shows you the workaround.

Regards,

  • 1 accepted solution
  • 2749 Views
  • 1 replies
  • 2 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!