Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Error 503: Service Unavailable

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Error 503: Service Unavailable

L1 Bithead

Hello!

I am configuring  an ha cluster Fw 440.Firmware 10.1.3

 

When i push "commit" i lost gui access.

I can ping andaccessvia ssh to fw.

I recover the gui access via cli:request restart system.

 

I have updatefirmware to 10.1.11-h5 but i happen the same or something worst!

main fw never gotaccessvia gui

Bakcup fw happen the same than before

 

1.How to solve it? ideas?

 

2.Comamnd to enable the gui access from cli without rebooting all the fw?

 

Thank you

5 REPLIES 5

Cyber Elite
Cyber Elite

which changes are you committing?

if this happens frequently and you don't know why, try device > setup > operations > revert from running config

that will refresh your candidate config with what has actually been committed to the firewall, make a small change and try again

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Hello!

The gui access after is not working after each change i made in configuration. Forexample, just changing the name of the fw,after "commit" the gui access stop working.

 

How to solve it?


Thankyou

making changes to the management interface may cause a short restart of the management service. you may be logged out but should regain access shortly

have you tried running the 'revert running config' ?

 

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

Hello! 

Yes, but i dont want to revert a change in config. 

I am sure that the change config is all right... and the problem is that the gui access stop working.

 

I made a change configuration.When a made "commit" gui stopped working. Via cli i restarted the fw...and i recover gui access when the fw start,and the change config is loaded.So, i think it is now because there is an error in change config.

So,i dontwant to return to previously config...i want to stop gui broken each time i push "commit".

 

Some ideas?

 

Thank you

L0 Member

Any update?

  • 1439 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!