Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-28-2011 03:05 AM
Anyone help on this? We can't alter the logdb quota settings (at least on the GUI) on Panorama - we get an error of "management is missing 'storage-partition' " even if we make a tiny change eg. reducing the size of the threat databse to 24% from 25%.
I attempted to make the change from the CLI "set deviceconfig setting management disk-quota traffic xx" - this came back with a CLI error about the "storage-partition" again. The values had NOT changed in the CLI "sho system logdb-quota" - but they HAD changed when displaying the GUI!! We then couldn't load the firewall policy from Panorama to the 4050s - it Failed with a message about the "storage-partition". Tried rebooting the Panorama - with no resolution - had to reload an old config before I had strated changing the quota settings.
We need to be able to change the log quotas to fit our needs - any advice anyone?
10-28-2011 08:31 AM
Hi - we are running v4.0.5 on both the Panorama and the 4050s. Thanks
10-30-2011 10:20 PM
Go to Panorama Tab -> Storage Partition setup -> Change to NFS Hit OK -> Go back into Storage Partition Setup and switch back to Internal -> Hit OK.
Try the commit again.
11-09-2011 05:36 PM
Hi - Sorry about the lenght of time to reply. I've tried that this evening and it's worked fine now! Many thanks.
11-09-2011 06:15 PM
As always, our pleasure!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
