VMWare installation & EVE NG Setup step by step for Multi Vendors Devices
As for every IP Network Engineer readiness of the simulator especially the multi-vendors environment, EVE-NG is a big headache. But honestly, this is very simple and only needs a few minutes to focus. Highly request that Please follow the exact steps that I will do below. With the one-time setup & you will enjoy lab simulations always.
First of all, prepare & download the below-mentioned software, click on downloading link if you don’t have already it, simply search on Google or comment your email below I will share it with you.
I have downloaded below software’s VMware 16.1.0, EVE-NG 5.0.1-13 & Palo Alto firewall & Cisco Routers image
Now let’s do the Installation Part
Step-1:
· VMWare installation is very easy to double click & next-next… –Finish
Step-2:
Open VMware go-to File then open – upload EVE NG open virtualization format file then import, Wait for a few minutes it will take time.
in have explained complete setup A to Z till cli access ,below link for reference
https://www.readteknology.com/2023/06/EVE-NG-Setup-and-VMWare-installation.htm
if still you have any confusion send me email or give any disk I will support you remotely. Thanks
Hello Guy's ,
Now from Palo Alto , I'm able to get internet internet traffic, the challenge bit it to get internet from the server(INSIDE) from OUTSIDE(Palo Alto Leg). See below configuration and network diagram. I can initiate ping from server to Palo Alto vise versa.
I want to be able to browsers from my server.
set rulebase security rules LAN-2-OUTSIDE to OUTSIDE_ZONE
set rulebase security rules LAN-2-OUTSIDE from INSIDE_ZONE
set rulebase security rules LAN-2-OUTSIDE source 192.168.10.0/24
set rulebase security rules LAN-2-OUTSIDE destination any
set rulebase security rules LAN-2-OUTSIDE application [ web-browsing ssl ping dns ]
set rulebase security rules LAN-2-OUTSIDE service any
set rulebase security rules LAN-2-OUTSIDE action allow
set rulebase security rules LAN-2-OUTSIDE log-end yes
set rulebase nat rules MY-NAT from INSIDE_ZONE
set rulebase nat rules MY-NAT to OUTSIDE_ZONE
set rulebase nat rules MY-NAT source 192.168.10.0/24
set rulebase nat rules MY-NAT destination any
set rulebase nat rules MY-NAT to-interface ethernet1/3
set rulebase nat rules MY-NAT service any
set rulebase nat rules MY-NAT source-translation dynamic-ip-and-port interface-address interface ethernet1/3 ip 192.168.71.254/24
