03-24-2021 06:51 PM
We have a configuration to balance two NAT destinations, in the Translated Address we have a group with the two IP destination
We need to performing a failover if NAT # 1 192.168.251.21 stops working, passing to NAT # 2 192.168.251.22.
When the IP # 1 is turned off, so that it sends the traffic to IP # 2, it is still trying to go out on IP # 1
Is this configuration possible?
03-24-2021 11:54 PM
I don't get what exacltly you want by reading the description. Have you tested path monitoring?
03-25-2021 03:50 AM
if i understond your question correctly, you already have route balancing mechnism configured , if so seems like both traffic matching the same NAT rule.
NAT rules need to have what to diffrentiate in "Traffic Matching" between them, that means for example you will need different destionations zones or destionations interfaces...
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!