Failover in NAT
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

The Enhanced LIVEcommunity Experience is finally here! Learn all about it.

Failover in NAT

L0 Member

We have a configuration to balance two NAT destinations, in the Translated Address we have a group with the two IP destination

We need to performing a failover if NAT # 1 192.168.251.21 stops working, passing to NAT # 2 192.168.251.22.

When the IP # 1 is turned off, so that it sends the traffic to IP # 2, it is still trying to go out on IP # 1

Is this configuration possible?

2 REPLIES 2

L4 Transporter

I don't get what exacltly you want by reading the description. Have you tested path monitoring?

 

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClG7CAK

L4 Transporter

Hello,

if i understond your question correctly, you already have route balancing mechnism configured , if so seems like both traffic matching the same NAT rule.

NAT rules need to have what to diffrentiate in "Traffic Matching" between them, that means for example you will need different destionations zones or destionations interfaces... 

 

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!