- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-09-2011 05:53 PM
Hello team.
on the firmware 3.X, when I put the unsupported SFP to PA, it show warning message..
but on the firmware 4.0.1, I don't see that warning message..
"Non-qualified SFP detected on port %d: vendor '%s'; part '%s'"
it means.. we're starting to support all SFP or no longer care about the SFP?
thank you
BH Lee
03-11-2011 10:08 AM
The warning was removed in 4.0 and 3.1.8 as it sometimes erroneously appeared for supported SFPs. The current list of supported SFPs can be found at this link:
https://live.paloaltonetworks.com/docs/DOC-1734
While other products may work well wilth the PAN, they are not supported, meaning a bug will not be opened if they do not work.
03-13-2011 05:24 PM
thank you very much
BH Lee
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!