03-03-2023 03:34 AM
I am seeing the Ip address give to the tunnel interface is wrong ( for the tunnel with AWS) , but tunnel came up and working without any issue.
Can anybody suggest on this. Would the IP address which we will give to the tunnel interface would not matters.
03-03-2023 03:47 AM
Hi @Sujanya ,
The IP address on an IPsec tunnel is optional. A standard site-to-site VPN does not require a tunnel IP address. https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/vpns/set-up-site-to-site-vpn/set-up-an-ip... (Step 3)
Since the tunnel is point-to-point, all the NGFW has to do is route traffic down the tunnel and it will be received on the other side. No routing to IP addresses is needed.
Thanks,
Tom
03-03-2023 03:47 AM
Hi @Sujanya ,
The IP address on an IPsec tunnel is optional. A standard site-to-site VPN does not require a tunnel IP address. https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/vpns/set-up-site-to-site-vpn/set-up-an-ip... (Step 3)
Since the tunnel is point-to-point, all the NGFW has to do is route traffic down the tunnel and it will be received on the other side. No routing to IP addresses is needed.
Thanks,
Tom
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
