Global Protect MTU setting overwritten

cancel
Showing results for 
Search instead for 
Did you mean: 

Global Protect MTU setting overwritten

L2 Linker

Trying to set MTU for my GlobalProtect client.
I've found some information about this in Palo Alto docs.
I could not set it with netsh, I think it is because of GPO.
But I could set it with the PowerShell command: SET-NetIPInterface -InterfaceIndex 3 -NlMtuBytes 1300
When looking in the registry I see now MTU 1300 on the interface to which is assigned to PANGP Virtual Adapter.
But it seems that this setting is overwritten when establishing a VPN-connection.

I see this in the PanGPS.log:
(P6400-T4696)Debug(4561): 03/21/22 11:53:37:876 Try to set VA idx 3 MTU to 1400.
(P6400-T4696)Debug(4580): 03/21/22 11:53:37:876 set MTU: Found VA 3-IPv4-1300, set MTU to 1400.
(P6400-T4696)Debug(4590): 03/21/22 11:53:37:877 set VA MTU IPv4 to 1400 success
(P6400-T4696)Debug(4580): 03/21/22 11:53:37:877 set MTU: Found VA 3-IPv6-1300, set MTU to 1400.
(P6400-T4696)Debug(4590): 03/21/22 11:53:37:877 set VA MTU IPv6 to 1400 success


Do I really have to set the MTU in the Panorama-Settings?
I just want to change MTU for specific client.

Thanks.

2 REPLIES 2

Community Team Member

Hi @ChrisCon ,

 

As far as I know you can't set it for a specific client:

Configurable Maximum Transmission Unit for GlobalProtect Connections

 

Cheers,

-Kiwi.

 

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Don't forget to hit that Like button if a post is helpful to you!

Cyber Elite
Cyber Elite

@ChrisCon,

Part of the setup process for GlobalProtect is going to override whatever interface changes you made before establishing the tunnel. If I recall properly from long-ago threads, you would need to modify this post connection at the interface every single time you establish a connection. 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!