GP Gateway commit error.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

GP Gateway commit error.

L3 Networker

Hi,,

 

Even after i configured to "Retrieve Framed-IP-Address attribute from authentication server" Why am i still getting IP pool range commit failure ??

 

Please find below screenshots.

 

Commit ErrorCommit ErrorConfig SettingConfig Setting

Thanks & Regards,
Sahithyan S
1 accepted solution

Accepted Solutions

L3 Networker

Guys,

 

The thing here is the firmware version.

Below than 9.0.0 firmware's will throw an commit error if u haven't configured the client IP Pool just as a fall back option, If retrieved framed IP is failed to get IP from server then it will fall back to Client IP pool segment. So there is no other option than to create a client IP pool segment if you are in below 9.0.0 version.

Hope this helps for many since there is no information and documents related to this.

 

 

 

 

Thanks & Regards,
Sahithyan S

View solution in original post

3 REPLIES 3

L4 Transporter

Hello @sahithyan.subbu 

Try to define the pool in Agent --> Client IP Pool

Make sure the pool in Agent --> Client Settings --> `config name` --> IP Pools is empty

You might need to remove the complete gateway config. Then start with the "Client IP Pool" before clicking on "Client Settings".

HI @JoergSchuetter ,

 

Thanks for the response.

 

Removing the whole gateway is not an option here. Is it possible to create an other gateway with same ISP IP ?

 

But question is, if we configure the Client IP pool in Agent tab before getting into Client Setting then i cannot configure the retrieve Framed IP option. Agenda here is, GP users should get a static IP from Server.

 

 

 

Thanks & Regards,
Sahithyan S

L3 Networker

Guys,

 

The thing here is the firmware version.

Below than 9.0.0 firmware's will throw an commit error if u haven't configured the client IP Pool just as a fall back option, If retrieved framed IP is failed to get IP from server then it will fall back to Client IP pool segment. So there is no other option than to create a client IP pool segment if you are in below 9.0.0 version.

Hope this helps for many since there is no information and documents related to this.

 

 

 

 

Thanks & Regards,
Sahithyan S
  • 1 accepted solution
  • 3040 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!