GP - second gateway creation problem

[_slv_]

Hi

I have PA200 with 5.0.5 with ateway and portal licence.

On untrust interface I have /26 network

To set up another gateway I added second IP to my untrust interface. X.X.X.141 with /32 mas - is it correct?

after commit I add new gateway profile and try to add client configuration.

But I cant pick a checkbutton

what I do wrong?

I need second getway because I have to isolate users using this gateway and put different network config to it.

I tested FF i IE browser.

With regards

SLawek

[panos]

Your config is correct.I replicate it and I can pick that tunnel box.

Tried with version 5.0.5

Can you try to delete that gateway and create new one.Then go directly to Tunnel selection look if you can select it.

[UhMayYeah]

When adding a new gateway ,tunnel settings have to be configured before hitting OK as they will be grayed out if you revist them.

I second . try deleting and re configuring.

-Ameya

[_slv_]

I deleted and created new one - but it doesn't help me.

and Network settings is greyed out

I think that I stuck on tunnel interface so I try to create it first on Network>Interface>Tunell

When I klicked add and fill up fileds the OK button is inactive

also I can't change it name. Is it another PA200 limitation?

What I do wrong?

Regards

SLawek

[panos · Accepted solution]

this time the greyed out is not same window as I see.

Tunnel interface's are virtual and you only input a number.this is not a limitation.You should type a suffix.

Until you choose a tunnel interface , Network settings will be grey.this is normal.

[_slv_]

Thx ... I missd one field

Thank you for your help!

Regards

SLawek