03-26-2019 03:26 PM - edited 03-26-2019 03:26 PM
On GUI i see traffic logs but no system logs.
LAst system logs are from yesterday.
Ran the below command
show log system direction
> equal equal
admin@EOCDC-G3-NGFW-2(active)> show log system direction equal backward
Time Severity Subtype Object EventID ID Description
===============================================================================
it only show me logs from march 25
should i restart the log receiver or management server?
please advice
03-28-2019 02:03 PM
My understanding of the process is that it's what actually writes the log files to pretty much everything on the device. If that process is malfunctioning (you could check this via 'less mp-log logrcvr.log') then you wouldn't be getting any logs on the system.
03-27-2019 11:59 AM
If the logs aren't getting generated in the CLI or the GUI I would restart the actual log receiver process, not the management server.
03-27-2019 02:10 PM
so what does log receiver process does ?
does it write logs on the PA so that they can be displayed?
03-28-2019 02:03 PM
My understanding of the process is that it's what actually writes the log files to pretty much everything on the device. If that process is malfunctioning (you could check this via 'less mp-log logrcvr.log') then you wouldn't be getting any logs on the system.
03-28-2019 09:39 PM
Many thanks for answering the Question.
Happy to learn from you.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
